The signal from the input that you select for recording will be sent
to the record output sockets marked
TAPE out 1, out 2
and
out 3
(4)
.
To select your source for recording, turn the
RECORD
selector until
the mark on its side points to the name of the input that you want
to record
(5)
.
The record output is not affected by the muting or volume controls.
inputs for
recording
Your PA20R has six line level inputs which can be selected by
name
(1)
. The input for listening can be selected independently
from the input for recording, so you can listen to one source
and record another at the same time.
The signal from your chosen input source will be amplified and
sent to
OUTPUT 1, 2, 3
(2)
and the headphone socket. To select your
source from the front panel, turn the
INPUT
selector until the mark
on its side points to the name of the input that you want to listen to.
You can also select an input for listening by pressing the button
on the remote control marked with the name of the input
(3)
.
For optimum performance from the remote control you must point
it towards the remote control pickup window on the front panel.
The remote control can also be used with selected TAG McLaren
Audio F3 Series CD players. For details, see the separate remote
control instructions.
inputs for
listening
using the
remote control
12
13
selecting an input
selecting an input
R E C O R D
aux
tuner
cd
tape 1
tape 2
tape 3
1. The inputs for
cd
,
tuner
,
aux
,
TAPE 1
,
TAPE 2
and
TAPE 3
are all the same
electrically. They are named for your convenience
2.
OUTPUT 3
is only functional if your PA20R has been fitted with the optional
transformer-coupled and balanced output. See page 19 for details
3. When you use the remote control, the
INPUT
selector on the front panel will turn
automatically to point to the selected input. Make sure that nothing interferes
with the free movement of the selector when you use the remote control
4. The
TAPE out 1
,
out 2
and
out 3
output sockets are connected together internally
5. With many preamplifiers, a feedback loop can be created if the output and input
of a tape recorder are both connected to the preamplifier and the same tape
recorder is selected as the record input. The PA20R has microprocessor-
controlled relays which prevent this from happening
I N P U T
cd
tuner
aux
tape 1
tape 2
tape 3
left
right
left
right
out
3
2
1
in
out
in
out
in
T A P E
GRA00046.1-[CA]PA20R 13/03/01 11:12 Page 13