TAG MCLAREN AUDIO 60i Manual Download Page 14

service

The only service you should do to your 60i is described on the
left. All other servicing should only be carried out by one of our
authorised service agents.

If service is required, please contact your authorised TAG
McLaren Audio retailer. If your 60i is still under guarantee, please
refer to the guarantee card which gives you details on how to
claim against the guarantee. 

Please keep the original packaging and use it whenever your 60i
is transported.

There is a fuse in the power socket on the back of your 60i. 
To change the fuse, unplug the power cable and pull out the fuse
carrier drawer

(1)

.

The fuse carrier contains a spare fuse; this is the first one that you
see when you open the carrier.

There are no other user-serviceable parts inside the 60i.

In order to maintain the appearance of your 60i, you can clean 
it as follows:

before cleaning, always disconnect your 60i from the AC
supply.

any grease or dirt on the case may be removed with a soft,
lint-free cloth moistened slightly with a mild solution of warm
water and detergent or washing-up liquid. Do not use any
other solutions. Do not use any solvents or abrasives.

take great care not to get any liquid inside the case.
If this happens, you should have your 60i serviced.

fuses

cleaning

1. You cannot open the fuse carrier drawer while the plug is in the socket

care and maintenance

26

27

care and maintenance

GRA00046.1-[CA]60i  12/03/01  12:06  Page 27

Summary of Contents for 60i


















Reviews: