‘Straight Line Technology’ with direct coupled signal and
feedback paths
High-quality audio components
Precision metal-film resistors
Cerafine power supply capacitors
Epoxy glass circuit board
Rated 125 W, typically 145 W into 8
Ω
continuous (rated
200 W, typ. 240 W into 4
Ω
and rated 275 W, typ. 320 W
into 2
Ω
for short periods)
Duplicated loudspeaker terminals (for bi-wiring or multi-room)
Signal output to connect to another power amplifier or to modify
input characteristics
Sorbothane
®
sonic isolation feet, specially designed by
TAG McLaren Audio
(1)
We know you are keen to get your 125M working. This section will
have you listening to your favourite music as quickly as possible.
If you fold out the front cover of this manual you will locate
diagrams which will help you find your way around your 125M
(1)
.
Make sure that all the components of your audio system are
disconnected from the AC supply whenever you change any
connections.
On the back of your 125M you will find two pairs of loudspeaker
terminals, each pair consisting of one red and one black.
The terminals on the back of the 125M use BFA
(2)
sockets.
The BFA plug pushes into the middle of the terminal.
08
09
key features
getting started
•
•
•
•
•
•
•
•
•
before
you start
loudspeaker
terminals
1. Throughout this instruction manual (except in titles),
bold
print indicates the
lettering that you will find on the panels of your 125M
2. In models for countries where the AC supply is 115 V, the terminals accept 4 mm
‘banana’ plugs instead of BFA plugs. 4 mm plugs are not permitted in Europe.
Please see page 15 for more details of the terminals
1. For the very best performance we recommend that our units are placed on
individual shelves and are not stacked one on top of another
GRA00046.1-[CA]125M 09/03/01 16:03 Page 9
