set-up
17
set-up
16
loudspeaker
terminals
loudspeaker
connections
On the rear panel of the 100x5R you will find five pairs of TAG
McLaren Audio loudspeaker terminals. Each pair is connected
to one of the five power amplifier modules. The terminals are
designed to accept high quality
3
/
8
” (10 mm) spade connectors
(1)
.
Use high quality loudspeaker cables, such as the TAG McLaren
Audio F3-10-SPK, terminated in high quality
3
/
8
” (10 mm) spades
to connect the red (+) terminal of the loudspeaker to the red
terminal on the rear panel of the 100x5R. In turn connect the black
(–) terminal of the loudspeaker to the black terminal on the 100x5R.
The diagram opposite
shows a standard loudspeaker
arrangement
surround sound
basics (cont)
The five channels of power amplification in the 100x5R are
designed to drive the five surround channels. As a result of the
self contained amplifier module construction all channels are
identical and any amplifier channel can be used to drive any of
the surround loudspeakers.
For best heat dissipation we recommend connecting the channels
as shown below.
1. To bi-wire your speakers, attach 2 spade connectors to each loudspeaker terminal
or preferably use a single run of higher quality loudspeaker cable instead.
photoshop100x5R Use Man 11/1/01 3:50 pm Page 16
