TAG Heuer SAR8A80, Instructions And Guarantee Card Tagheuerconnected.Com Printed In Switzerland Ei

Page: 25 / 184

with this limited two-year guarantee or by reason of the failure of TAG Heuer to complete the re-
pairs within the 30-day period.
In addition, certain limiting conditions do apply and for this reason it is essential that you read the
following paragraphs:
What are the limiting conditions of this guarantee?
To benefit from this limited guarantee the following conditions must be met:
• The international guarantee card, located in the guarantee booklet you received with your TAG
Heuer Connected Watch, must be enclosed with the TAG Heuer Connected Watch when it is
sent for repair and must be signed and dated at the time of purchase by an authorized TAG
Heuer dealer; TAG Heuer will not honor the guarantee for watches sold without a valid guar-
antee card properly filled out and signed by an authorized TAG Heuer dealer or by a dedicated
TAG Heuer boutique;
• The serial number engraved on the case is perfectly legible and no part of the original case back
or original serial number has been removed, modified, falsified, altered, replaced, erased, de-
faced or made illegible.
Failure to abide by any of the above conditions renders all rights resulting from the TAG Heuer in-
ternational guarantee null and void.
What is not covered
Damage resulting from service provided anywhere other than at an official TAG Heuer Customer
Service Center is not covered and shall void the guarantee. The limited guarantee does not cover
any software, bracelets, crystals and batteries, or any damage to the case or hardware due to mois-
ture that might have entered the TAG Heuer Connected Watch as a result of improper handling.
More generally, it does not apply if there has been improper or inadequate use of the TAG Heuer
Connected Watch:
• product has been dismounted by the user or by unauthorized person.
• product has been connected to non-recommended accessories such as other battery type or
charger.
• product has been voluntarily degraded or used out of the recommended rules for product
start-up or usage such as wrong plug-in or product has been exposed to extra voltage or electric
discharges, important shocks, drop or abnormal mechanical stress leading to major degrada-
tion of product housing, electronic components.
• product has been abnormally exposed to water or other chemical substances (presence of cor-
rosion, humidity).
23