manualshive.com logo in svg

TAG Heuer Monaco Sixty Nine, User Manaul, Page: 8 / 8

Share
Download
TAG Heuer Monaco Sixty Nine User Manaul Download Page 8

Setting the alarm ON or OFF:

In AL mode, to set the alarm ON or OFF, press button A for
more than two seconds. “ON” 

(fig. 26)

appears in the

bottom right-hand section of the display. A beep will sound
when the alarm has been set.

Setting the second time zone (T2)

– Select the T2 function 

(fig. 27)

by pressing button D.

–  To activate the setting mode, press button D for more

than two seconds.

–  Change the initial value by briefly pressing buttons A (+)

or B (-). The value for the minutes is increased or
decreased in increments of 15 minutes.

–  Move to the next value by pressing button C (24-hour

clock only).

–  To exit the setting mode, press button D.

Note:

the date can be changed by + one day in relation to

the T1 date.

BATTERY CHECK

The battery is checked automatically. When the battery is
low, the letters “BT” start flashing in the bottom right-hand
corner of the display 

(fig. 28),

alternating with the normal

display.

17

17

B

short push = decreases (-) the value to be set.

B

long push = continuously decreases (-) the value to be
set.

C

= changes to the next values to be set.

D

short push = exits the setting mode.

Setting the T1 time and date 

(fig. 24)

– Select the T1 function by pressing button D.
– To activate the setting mode, press button D for more

than two seconds.

– Change the initial value by pressing button A (+) or B (-).
– Move to the next value by pressing button C, (the time

is shown as a 12- or 24-hour clock; the default is a 24-
hour clock). The seconds are automatically reset to zero
when the setting mode is exited if the value for the
minutes has been altered.

– To exit the setting mode, press button D.

The months are shown as: JAN, FEB, MAR, APR, MAY,
JUN, JUL, AUG, SEP, OCT, NOV, DEC.

The years are shown as: 00 = 2000, 01 = 2001, 02 = 2002
etc. (99 = 2099.)

Setting the alarm (AL) 

(fig. 25)

– Select the AL function by pressing button D .
– To activate the setting mode, press button D for more

than two seconds.

– Change the value by pressing buttons A (+) or B (-).
– Move to the next value by pressing button C, and so

forth.

– To exit the setting mode, press button D.

16

fig. 24

C

A

D

B

Year
Month
Day

fig. 25

C

A

D

B

Alarm

fig. 26

C

A

D

B

ON/OFF
function

fig. 27

C

A

D

B

T2
function

fig. 28

C

A

D

B

Low
battery

fig. 23

C

A

B

D

Summary of Contents for Monaco Sixty Nine









Reviews:

No comments