19
11. Extension Modules (Menus 6, 7, 8)
You have the possibility to install onto your Start Clock several options, including “Ethernet module” or
“GSM Module”
WARNING:
It is strictly forbidden to remove an option when the Start Clock is powered.
IMPORTANT:
The Start Clock will not drive to similar option.
Each slot corresponds to a menu item
Slot 1 = Menu 6
Slot 2 = Menu 7
Slot 3 = Menu 8
11.1. Ethernet module:
Set =
0
Ethernet OFF
Set =
1
Ethernet ON with Standard IP Address (192.168.1.0xx)
You have the possibility to change the last 2 digits with the UP/DN arrows
Set =
2
Ethernet ON with pre-programmed IP Address
The IP Address can be set via PC with the
HL 940 Remote Control
program
Actif port: 7000, 13500, 13501, 13502 and 13503
11.2. GSM module:
You have the possibility to send and received timing information via GPRS
The full setting of the communication is configured by the GPRS program (IP Address, Port, etc).
Set = 0
GSM OFF
Set = 1
GSM ON with setting N°1
Set = 2
GSM ON with setting N°2
Set = 3
Status: will print the status information
Set = 4
SIM Card sold
12. Quick Start a Run
To start a Run, you must follow this procedure:
The HL 940 must first be synchronized (by GPS or manually) to time-of-day and date.
In case of several timing devices running simultaneously, you should take care that all timing
devices are synchronized together (Manual Synchro or Top Minute Synchro)
Select the program you want to run.
