fig. 12
Tang buckle
fig. 11
Bar
Case attachment
Bracelet
Tool
Pin
Horn
3. Fitting and removing the rubber strap
You have
(fig. 11):
– 2 bars
– 1 strap section with the case attachment:
long, with holes
– 1 strap section with the case attachment:
fitted with the tang buckle
– 1 diver’s extension (without the case
attachment and fitted with a tang buckle)
Follow the same procedure as for the steel
bracelet.
Exception:
the case attachment
is integral with the strap.
Important - positioning:
the strap section
with the tang buckle must always be
positioned on the 12 o’clock side
(fig. 12).
