Tador MOON9-KIT, User Manual

Page: 4 / 16

-4-
Electric Lock Connection
Door Lock Controlled with Internal Power
Note:
1. Electronic lock of Power-on-to-
unlock type should be used.
2. The door lock is limited to 12V, and
holding current must be less than
250mA.
3. The door lock control is not timed
from Exit Button(EB).
4. The Unlock Mode Parameter of
Monitor must be set to 0 (by default).
1 2 3
Jumper position in 2-3
L1 L2 PL S1+ GND
Door Lock Controlled with Dry Contact
Note:
1. The external power supply must be used
according to the lock.
2. The inside relay contact is restricted to
AC or DC 24V/1A.
3. The jumper must be taken off before
connecting.
4. Setup the Unlock Mode of Monitor for
different lock types.
• Power-on-to-unlock type:Unlock
Mode=0 (by default)
• Power-off-to-unlock type:Unlock
Mode=1
Take off the
Jumper
L1 L2 PL S1+ GND
LOCK