3
sec
3
sec
6. Configuration
Use the Wireless Temperature Sensor to configure the Wireless Receiver interface according to the tables above
(Hot Water control & Config. Menu ID).
B. Press the button
for 3 sec again and
release.
A. Press the button
for 3 sec and release.
G. Based on
interface, activate
Hot Water control.
C. Press the button
for 3 sec again and
release.
H. Press the button
when EK is displayed
to continue.
D. Please wait while
the installer menu
loads.
I. Select the Config
Menu ID according
to the table.
E. Press the button
when TS is displayed
to continue.
J. Save configuration
by pressing the
button.
F. Press the button
when HC01 is
displayed to confirm.
5. Pair the Wireless Receiver
Fast
blinking
Solid on
A. Put the cover on the
device. Tight the housing
screw to secure it.
B. Plug in the power
supply cable and turn the
power back ON.
C. Wait 30 sec, then press
the button for 3 sec to
start pairing.
D. Solid on indicates
successful pairing.
On
Wait
30 sec
2
min
3
sec
3
sec
