Tadiran Telecom FlexSet-IP 280S User Manual Download Page 35

Page: 35 / 283

Operating the FlexSet

FlexSet-IP 280S User Guide

Volume Adjustment

Volume Adjustment

Press the volume buttons to increase or decrease the volume of the phone loudspeaker and handset.

While the volume is being changed, the top line of the display shows the volume level.

Speaker

volume levels range from a MIN unit value of 0 to a MAX unit value of 9 (27dB range).

The

Handset

volume level ranges from a MIN unit value of 0 to a MAX unit value of 6 (18dB range).

Speaker and Handset each has its own audio level and is independently influenced by volume buttons as follows:
•

Speaker

: When conversing through the speaker, voice volume can be adjusted. Volume of call monitoring, paging, etc.

can also be adjusted. This can also be done from idle.

•

Speakerphone

: When conversing hands-free, the built-in sensitive microphone is used to amplify your voice. The system

operates in such a way that the two connecting parties (i.e. you and the far side) cannot be heard simultaneously; the
stronger party is heard. Press

to hear the far side more strongly, press

to be heard more easily (or to break in).

•

Handset:

When conversing through the handset or headset, receiver volume can be adjusted.

ENTER

ESC

ABC

Volume Up

Volume Down

Volume Buttons

Summary of Contents for FlexSet-IP 280S




























































































































































































































































































Search results

Summary of Contents for FlexSet-IP 280S

Reviews:

Related manuals for FlexSet-IP 280S

Brands by name

Popular brands

Tadiran Telecom FlexSet-IP 280S, User Manual

Search results

Summary of Contents for FlexSet-IP 280S

Reviews:

Related manuals for FlexSet-IP 280S

Brands by name

Popular brands