Tadiran Telecom FlexSet 280S User Manual Download Page 169

Page: 169 / 253

Station Features

161

FlexSet 120S/280S User Guide

Setup: Telephony Features

[DND-WP]

Do Not Disturb - Whisper Page

is used to enable or block your FlexSet from receiving a message

whispered by another station. Press

[DND-WP]

from idle to block or enable your FlexSet from receiving

whisper pages, and again to cancel. When this feature is activated, a bullet appears next to

[DND-WP]

If you press while on a call, the feature will be active for the duration of the current call only.

[Privac]

Privacy

. As a Boss Group member, you can put your FlexSet into Privacy mode. This prevents other

members of your Boss Group from accidentally joining your conversations.

(See Boss Groups: Privacy on page 61)

1. To

activate

Privacy, press

[Setup]

[Privacy]

The message

PRIVACY

is displayed.

When this feature is activated, a bullet appears next to

[Privac]

2. To

cancel

Privacy, press

[Privacy]

again.

The message

NO PRIVACY

is displayed.

[ExHold]

Exclusive Hold

. As a Boss Group member, you can put your FlexSet into Exclusive Hold mode. This

ensures that a call placed on hold can be retrieved only at your station. If Exclusive Hold is cancelled,
the call put on hold can be retrieved by any other member of your Boss Group.

(See Boss Groups: Exclusive Hold on page 62)

1. To

activate

Exclusive Hold, press

[Setup]

[ExHold]

The message

EXCLUSIVE HOLD

is displayed.

When this feature is activated, a bullet appears next to

[ExHold]

2. To

cancel

Exclusive Hold, press

[ExHold]

again.

The message

NON EXCL. HOLD

is displayed.

[MoveSt]

Auto Set Relocate

(move station) allows you to move your station and all your station’s predefined

features to a new location.

See Auto Set Relocate on page 56

Summary of Contents for FlexSet 280S






























































































































































































































































Search results

Summary of Contents for FlexSet 280S

Reviews:

Related manuals for FlexSet 280S

Brands by name

Popular brands

Tadiran Telecom FlexSet 280S, User Manual

Search results

Summary of Contents for FlexSet 280S

Reviews:

Related manuals for FlexSet 280S

Brands by name

Popular brands