Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 493 / 510

Coral IPx Office Installation Manual System Networking
11-7
NTU Office Car
d
D
escription
11
0
The NTU Office card is mounted onto the MCB Office card and includes the following
components (see
Figure 11-3
):
„
NTU Office card housing . This is the metallic frame that supports the NTU
Office card. The NTU Office card is permanently assembled onto the housing
and is not removed in the field.
„
NTU Office card . This card functions as the system router and includes all of
the components as detailed below.
„
WiFi Card . The WiFi card is provided at specific customer request and is
mounted onto the NTU Office card.
„
WiFi Antenna Connectors . The WiFi antenna wires are routed directly from
the WiFi card to the WiFi antenna connectors that protrude from the front
panel of the system. The antennas are attached onto these connectors.
„
Power Connector . Includes the connector of the power harness connector.
„
ON/OFF Switch. This switch activates the NTU Office card.
„
Connectors to LAN Port . Includes four connectors, one of which is
connected to the MCB Office card, enabling direct connection to the front
panel LAN ports.
„
Connector to WAN Port . Includes one port that is connected to the MCB
Office card, enabling direct connection to the front panel WAN port.
„
Reset Button. Used to reset the NTU Office card from the front panel.
Figure 11-3 NTU Office
Card
...................................................................................................
4 NTU Office Card Components
Wi.-Fi
WiFi antenna
cables
Power connector
ON/OFF switch
Connector to WAN port
Connectors to LAN ports
WiFi card
USB printer port
WiFi antenna
connector
WiFi antenna
connector
NTU Office card
housing
NTU Office
card
Reset button
Reset button wires
Front panel of unit