Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 334 / 510

9-22
Shared Service Cards Coral IPx Office Installation Manual
U-RMI / U-MR
/
RMI / MR
Office Car
ds
9
URC2 Database Programming (U-RMI Office and U-MR Office cards)
The URC provides the features listed in
Table 9-10.
The URC in a Coral system has
considerable impact on the system database. Use the PI to verify that each of the
parameters detailed in this chapter is defined correctly. Refer to
Program Interface
(PI) and Database Reference Manual for more details.
Maximum URC Resources
Each system resource circuit uses Coral time slots (resource points). The Coral
enables a maximum of 120 resource points per URC2.
Table 9-11
lists the resource
points needed per circuit and enables the technician to plan accordingly when
configuring the URC configurations.
A maximum of 120 resource points is allowed per URC2 card. Therefore, the Full
Assembly is never used. Allocate your resources such that you use a maximum of 120
resource points. For example, increasing the number of 3-way circuits, forces you to
decrease one or more of the other resources.
Table 9-11 PI defaults
per URC2 Resource
Resource Type
Max Circuits
per URC2
(Full
Assembly)
Resource
Points
Needed per
Circuit
(CKT)
Default
Configuration
See Table
Max
CKTs
Resource
Points
Needed
DTMF Receiver
(DTR) 24 1 24 1x24 Table 9-13 on page 25
CONF (Meet Me) 6 16 2 16x2 Table 9-15 on page 27
3-WAY 24 4 8 4x8 Table 9-16 on page 28
Caller ID (CID) 32 1 16 1x16 Table 9-17 on page 29
DTD 32 1 16 1x16 Table 9-18 on page 31
TOTAL 66 120