Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 198 / 510

6-16
System Description Coral IPx Office Installation Manual
General System Descriptio
n
6
Blank Panels
Blank panels are used to cover peripheral card slots that are not occupied by a
peripheral card. The blank panel covers the slot, blocking the insertion of foreign
objects into the system, thus preventing inadvertent shock or malfunction. There are
four blank panel sizes. See
Table 6-2 and Figure 6-16 .
Table 6-2 Blank Panel
Description
Figure 6-15 Type 1-A
Blank Panel Used in Slot
10-11
Part Number Card Type Card Description
77444000066 Type II Full sized panel used to cover slots 2-3 and 4-5
77444000067 Type I-A Half-sized panel used to cover slots 6-7 and 10-11 *
* If either 30T Office, 4TBR Office, PRI-30 Office, or UDT Office is installed in slot 10-11, blank
panel 1-A must cover the opening directly above the installed card. See Figure 6-15 .
77444000068 Type I-B Half-sized panel used to cover slot 8-9, 10-11
77444000069 Type I-C Half-sized panel used to cover slot 10-11
LOS RAI CRC
GEN
SEC PRM
SYNC
PRI-30 Office
Type 1-A Blank Panel
Electrical Hazard. Contact with live internal components could cause shock, burn, or
death. During system operation, peripheral card slots that are not occupied must be
protected by a blank panel.