Tadiran Telecom Coral IPx 800 Series, Installation Procedure And Hardware Reference Manual

Page: 310 / 400

6-70
Coral IPx 800 Installation Manual
System Co
nfi
gurat
ion
Opti
ons Co
ra
l IPx 8
00
6
0
General
The Coral IPx 500X expansion cage is a small, rack or wall-mounted extension to the
Coral IPx 500M or Coral IPx 800M cage. It supports any of the Coral FlexiCom 200 and
IPx 500 family small factor and peripheral cards. Any combination of up to two
IPx 500X and IPx 800X expansion cages can be connected to one IPx 800M cage. The
key features of the IPx 500X cage capacity and functions are described below.
Card Slots
One IPx 500X cage may house ten peripheral special form-factor “ipx” cards.
These card types are described in detail in Chapter 10 of the Coral IPx 500 Hardware and
Installation Manual
.
Port Capacity
One IPx 500X cage supports up to 160 combined trunk and wired station ports.
Power Supply
The expansion unit is compatible with 48VDC or 115/230VAC power. Like the
IPx 500M cage, the expansion cage is either powered by the PS500 AC or PS500 DC
power supply unit. There is also an option to install a backup battery for the IPx 500X
cage. This battery pack, known as the BATTipx, can be ordered at specific customer
request.
MDFipx
An MDF may be supplied with the IPx 500X cage at specific customer request.
Whenever an MDFipx unit is included with an IPx 500X cage, it can function as a
master ground and be connected directly to the building master ground.
Setting the Configuration Jumpers
For information on setting the configuration jumpers on Coral IPx 500X cages, refer to
the Coral IPx 500 Installation Manual, Section 6.3.
4 Optional Coral IPx 500X Expansion Cage