Tadiran Telecom Coral IPx 500X, Installation Procedure And Hardware Reference Manual

Page: 114 / 400

3-24
Coral IPx 800 Installation Manual
Sha
re
d
Service and
Peri
pheral
Car
d
T
est
3
First Expansion Cage Initialization
1. In a system with two expansion cages; verify that the PX card is fully inserted in
slot 1 of the first IPx 800X expansion cage.
2. Turn ON the power supply unit in the first expansion cage.
Turn on the power supply unit within the expansion cage only after powering
the main cage and verifying that the control card has initialized properly,
otherwise the cards in the expansion cages may not initialize properly.
3. Insert the peripheral cards completely into their card slots. See
page 3-20, Rules for
Inserting a Coral Circuit Card
.
Insert the cards fully, one by one, from right to left (slot# 1-12) in adjacent card
slots, so that the installation corresponds with the uniform numbering plan.
4. On the front panel of the PS19 unit, verify that the green power indicator is lit,
while the red alarm indicator is not lit.
Second Expansion Cage Initialization
1. Turn ON the power supply unit in the second expansion cage.
Turn on the power supply unit within the expansion cage only after powering
the main cage and the first expansion cage and verifying that the control
card has initialized properly, otherwise the cards in the expansion cages may
not initialize.
2. Insert the peripheral cards completely into their card slots. See
page 3-20, Rules for
Inserting a Coral Circuit Card
.
Insert the cards fully, one by one, from right to left (slot# 1-12) in adjacent card
slots, so that the installation corresponds with the uniform numbering plan.
3. On the front panel of the PS19 unit, verify that the green power indicator is lit,
while the red alarm indicator is not lit.