Tadiran Telecom aeonix TGW4, User Manual, Page: 38 / 141

User Manual
T G W S IP -F X S /F S O G a te w a y S e rie s
22
Tadiran Telecom
Table 1-35
Meanings of
TGW96-2G
Indicators
Indicator
Status Description
PWR
(red, green)
Steady green The power supply is working.
Off No power supply.
Steady red The power supply is abnormal.
STU
(red, green)
Blinking green The device is running.
Steady red The device is starting.
Blinking red The device is under diagnosis.
Off The device is locked.
ALM
(red, green)
Off No alarm
Blinking red
The alarms indicated by the blinking alphabetic messages C/E/T on LED
dot-matrix are generated.
Steady red
The alarms indicated by the blinking alphabetic messages D on LED
dot-matrix are generated.
ETH1/ETH2
(green)
Steady green
(right side)
The transmission rate is 1000 Mbps.
Off
(right side)
The transmission rate is 10/100 Mbps.
Steady green
(left side)
A physical connection is established without any traffic.
Blinking green
(left side)
A physical connection is established with traffic.
Off
(left side)
No connection is established.
USB
(green)
Steady green The USB device is detected.
Off The USB device is not detected.
Table 1-36 TGW96-2G
System Operation State
Glittery letter Status meaning
Blinking with C IP address conflicts
Blinking with D The severe starting failure needs to address by your dealer
Blinking with E Network failure
Blinking with P Software upgrading
Blinking with T App exited (The device cannot be used normally)