Tadiran Telecom Aeonix T200M Series, User Manual

Page: 51 / 316

Operating the Phone 37 T200M Series User Guide (Coral IPx / FlexiCom)
Making Internal Calls
Upon Hearing Ringback Tone
After dialing an internal destination number, the following features appear on your phone display when you hear a ringback
tone. Wait for answer or press the nearby soft key to activate the required feature.
See
page 23
for further details.
NOTE! A message indicating the called party’s status (or other relevant information) may appear on the
second line of the display until you answer the call
(see Canned Messages on page 94) .
[Msg.]
or MSG Leave Message . If no one answers your call, use this feature to leave a “message” at the called party’s
station. This feature lights the message waiting lamp at the called party’s station indicating that a message
was left, and it leaves a simple message such as
CALL SUSAN
on the destination station’s keyset display.
See Messages: Options on page 149 .
[MsgW]
Message Waiting . The Attendant can use this feature to leave a message waiting indication at a busy or idle
station, room or group. See Leaving a message indication at a busy or non-answering station: on page 151 .
[Camp]
Camp On , also known as Call Back. When a station does not answer, you may request that the system
automatically call you back when the required destination number is available. See Camp On (Call Back) on
page 91
.
[VPg]
Voice Page the called party’s keyset station using this feature. Your call is automatically answered and your
voice heard over the called party’s speakerphone. See
Paging: Voice Paging on page 169
.
[Mute]
or
MUTE
Mute can be activated during ringback so that when the call is answered your side of the conversation is
muted and the called party will not hear you. When this feature is activated by the MUTE on/off toggle
INTERNAL called number or name

Msg. Camp VPg Mute