Tadiran Telecom Aeonix T200M Series, User Manual

Page: 163 / 316

Station Telephony Features 149 T200M Series User Guide (Coral IPx / FlexiCom)
Messages: Options
Messages: Options
You can leave a message at another station and conversely, any station can leave a message at your station.
Press
[Msg]
to access the message options.
.
[Msg.]
or
MSG
Leave Message is used to leave a message at another station, or to access messages left at your station.
Viewing and answering messages left at your station:
1. The message lamp flashes and a bullet appears next to the
[Msg]
and
[Msg.]
keys when there is a message waiting. The
message consists of simple text, such as
CALL SUSAN
, or
CALL VOICE MAIL
, which is displayed on the top line.
2. Choose one of the following options after pressing
[Msg.]
or MSG :
[Prev]
To view the previous message. If there is no previous message,
LIST START
appears on the top line.
[Next]
To view the next message. If there are no other messages, then
LIST END
appears on the top line.
[Out]
To call back the message sender. The message lamp is turned off if there are no other messages. To call the
Voice Mail, see
page 152
.
[Dest]
To leave a message at another system station, dial a station, Boss Group or network number, and listen for
the confirmation tone.
[Canc]
To cancel the message and the flashing message lamp without calling back the message sender.
[Num]
To briefly display the number of the person who left a message.
Page 1
10:50 26 May 2007 Company xyz
user name station number
 
[Msg]
Log Dir Fwd
Page 2
Message Options
 
[Msg.]
xMsg MsgW