PAGE 2
(Tools not provided)
Use a flat blade screwdriver to tighten the cam
nuts. A quarter turn clockwise is all that is needed
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so it
tightens over the bolt.
TWO PERSONS REQUIRED TO ASSEMBLE THIS PRODUCT
Please check that you have all the parts listed before you start
assembling. If you do find that something is missing, do not
continue assembly. Please contact your supplier immediately.
Lay out all of the components on a soft surface as if you were
preparing to do a jigsaw puzzle.
Separate and identify each component from the hardware pack and
rest each one in its proper location before fastening.
3.
2.
1.
