11
CONNECTING THE SPEAKERS
CAUTION
When connecting speakers or other components, always turn off the power to the amplifier, and disconnect the power cord.
'
Speaker cables are not furnished with this speaker system, and must be purchased separately.
'
Single-Wire Connections
For single-wire connections, connect the high- and low-frequency sections of the crossover network with the shorting link that was included
with this unit, then connect the (+) wire from your amplifier to either red binding post and the (-) wire from your amplifier to either black
binding post, as shown in Figure 7.
HF
LF
SPEAKERS OUTPUT
Amplifier
(rear)
(one channel shown)
Terminal Panel
Shorting links
TAD Compact Reference
Figure 7. Connecting a TAD Compact Reference speaker in a single-wired system
TAD-CR1_ENG.indd 11
2009/09/14 10:02:19
Summary of Contents for TAD-CR1
Page 1: ......
