TAD TAD-CR1 Unpacking Instructions Download Page 2

4.  Take the speaker off the bottom protector.

<SRG1005-B>

•  About speaker setup

For more information about proper setup, please refer to the Owner’s Manual.  The Owner’s Manual is located inside the 
Accessory Kit. 

This speaker system is extremely heavy (46 kg, or 101.4 lb). Be careful when removing it from 
the bottom protector to prevent possible injury or damage to the speaker set. 

•  In order to protect the floor upon which you are to place the speaker, cover 

the installation area with a thick mat or rug when setting up the speakers.

•  Use at least two people to remove the speaker from its bottom protector.
•  Avoid dragging the speaker along its bottom side, as doing so can cause 

damage to the speakers.

5. Remove the bottom protector from the bottom lid, pull off the tape 

fi xing the accessory kit box, and take out the box.

Accessory kit box

TECHNICAL AUDIO DEVICES LABORATORIES, INC.

http://tad-labs.com

Published by Pioneer Corporation.

Copyright © 2009 TECHNICAL AUDIO DEVICES LABORATORIES, INC.

All rights reserved.

TAD-CR1̲unpacking̲En.indd   2

TAD-CR1̲unpacking̲En.indd   2

2010/07/08   11:11:17

2010/07/08   11:11:17

Reviews: