INDICA
INDICA
INDICA
INDICA
INDICAT
T
T
T
TO R S
O R S
O R S
O R S
O R S
GROUP
Active when a group of scanned channels have been selected. A number above will indicate
which group is active. Only valid in radios with Group Scan Software.
LOW
During RX operation this indicates the receiver is operating in reduced sensitivity mode to prevent
strong signals from overloading the receiver. During TX operation this indicates low power has
been programmed into the TX of this channel.
MON
This will only appear when a tone has been programmed into the RX. MON will indicate that
the muting function of the tone has been disabled. This may happen when the mic is taken “off
hook” or by enabling the monitor function.
PRI
“On” when the priority function has been activated.
SCAN
“On” when the radio is in scan mode. The radio also requires the mic to be “on hook” and channels
programmed into the scan sequence.
BUSY
Indicates a received signal has exceeded the squelch threshold. Audio will be heard unless a
tone is also muting the channel.
D
Appears on all channels NOT in the scan sequence.
D PROG
Radio is operating in Dealer Programming Mode.
U PROG
Radio is operating in User Programming Mode.
AUX
Not used.
HORN
“On” when the external horn blowing function has been activated. (MTS versions.)
TONE
Active when a CTCSS or DCS tone has been programmed into the channel. RX and TX tones are
indicated independently.
