Step two: How to use nailer/stapler
1. Plug tool into mains power outlet.
2. Turn the tool on at the on/off switch.
3. Hold tool firmly with tacking mouth flat to workpiece
forming a 90º angle- the safety pin in the mouth of tool
must be pressed firmly against the workpiece or it will
not operate.
4. Squeeze trigger to fire the tool.
5. On hard surfaces press down on top of tool with
free hand.
6. On soft surfaces use light pressure to prevent deep
nail penetration, and use the red nose piece
(supplied) to prevent marking the surface.
5
4
3
2
90
o
Tacking Mouth
Safety Pin
CLEARING A JAMMED NAIL
In the unlikely event of the tool jamming:-
1. Turn the tool off at the on/off switch and
disconnect at power outlet.
2. Open feeder by pushing down on the
release catch.
3. Free nail/staple from inside the magazine.
2
3
1
SAFETY
•
Always wear safety goggles.
•
Do not operate machinery when tired.
•
Ensure tool is turned off at the on/off switch
•
Keep children away.
when not in use.
•
Never expose tool to rain.
•
Do not wear loose clothing or jewellery.
•
Store tool in dry, secure place.
•
Ensure damaged parts/defective switches
•
Never carry tool by cord or yank to
are repaired by an authorised service centre.
disconnect from power outlet.
•
Never operate near flammable liquids or
•
Do not alter or misuse tool.
explosive atmospheres.
WARNING:
Not suitable for nailing/stapling into concrete, masonry, bricks or steel. DO NOT fire if the nails/staples
are jammed as this will cause damage to the driver blade. Ensure tool is turned off at the on/off switch when not in
use. Keep fingers off trigger until ready to drive staple/nail.
FASTENING TOOLS
FOR THE PROFESSIONAL
Warranty
1. This product has been manufactured to a high quality standard. It is guaranteed against faulty materials and workmanship
for 12 months from purchase, Please retain your receipt as proof of purchase.
2. If the product is found to be defective within the relevant time period, we will either replace all defective parts or, at our
discretion, replace the unit free of charge with the same item or items of a greater value and / or specification.
3. This guarantee does not cover defects caused by or resulting from:
(a) misuse, abuse or neglect;
(b) hire use;
(c) repairs attempted by anyone other than our authorised repair centres; or
(d) damage caused by foreign objects, substances or accident;
(e) consumable and / or wear items such as driver blades, feeder springs etc.
4. This guarantee is offered in addition to, and does not effect, your statutory rights.
Distributed in Australia by J W Ross and Sons ( Australia ) Pty Ltd.
PO Box 352 North Ryde BC, NSW, 1670
Inquiries phone 1800 251 338
