16
Customer Service Toll Free: 833.3TACTILE (833.382.2845)
4.1
Applying the Full Leg and Half Leg Garment
Garment Preparation:
1 . Once the garment is connected to the controller unit, unfold and
place the full leg or half leg garment(s) on the bed or sofa with the
inside garment material (darker fabric) facing up .
2 . Configure your garment(s) using the zipper configuration
indicated on your Prescribed Treatment Card . Zip the appropriate
pull string color (teal or black) to the numbered zipper (#1 or #2) .
Use the colored zipper to start the zipper . The following zipper
configurations are available:
Black pull string to zipper #1 – Petite
Black pull string to zipper #2 – Small
Teal pull string to zipper #1 – Medium
Teal pull string to zipper #2 – Large
NOTE:
If you are using an extender, position it so the narrow side is
located at the foot of the leg garment. Connect the teal pull string
located on the leg garment to the zipper on the extender. Then,
connect the teal pull string located on the extender to the #2 zipper on
the leg garment.
3 . Zip the garment up half way .
Garment Application:
4 . Sit down and slide your leg into the garment (see Figure 4.1.a.) .
Pull the garment up to the top of your thigh (full leg garment) or
knee (half leg garment); your foot should not exit the front of the
garment . Zip the garment up completely and ensure the zipper
pull is flat against the base to lock the zipper in place .
NOTE:
If the suggested configuration is too tight or too loose,
try another configuration based on the listings above.
