manualshive.com logo in svg

Tactik 3033109, Manual, Page: 8 / 9

Share
Download
Tactik 3033109 Manual Download Page 8

 

 

1028 Saunders Lane                                                                                         610.701.3336 ext. 3746 

West Chester, PA 19380                                                                                            404.558.8652 cell 

                                                                                                                                                    610.701.2402 fax 

8 / 9 

 

Soft Trifold Tonneau Cover 

Cover 

 

 

 

 

Release the rear clamps, fold the cover forward.  

Note  

1)  when folding the cover, make sure to lock the rear clamps into the 
Cover Side Rail. 

                                            

     

2)  When cover is folded completely, secure the folded cover by 
fastening the straps with buckles together. Pull the straps to tighten the 
folded cover tightly.  

                                        

 

Attention: 

Never Drive with a cover in partially opened position. When driving, 

cover must be secured with 4 clamps or completely folded up and 
secured by front clamps and buckles. 

To open the cover 

Summary of Contents for 3033109










Reviews:

No comments