No user serviceable parts inside
Do not remove module covers
General
This power convertor is designed for indoor use only.
The TPC10 is a low profile DC - DC / AC - DC Convertor designed to convert either 22-33V AC or 32-48V DC
to a reliable, clean output voltage of 24dc and is rated for 1A continuous output.
Note: Input voltage must not exceed 48V DC - permanent damage may result.
This model features output current limiting and thermal shutdown protection with auto recovery.
Connection
Connect input power to terminals marked “Input” (see diagram overleaf ).
Note that these terminals are not polarity conscious.
Load equipment may be connected to terminals marked “Out”.
Confirm polarity before connecting.
Output voltage is factory set to 24.3Vdc - see note below:
Battery Operation:
effective when output is adjusted to 27.6V
Input and output LED’s should be illuminated when operating normally.
There are no fuses or user serviceable components inside the cabinet - return to your supplier for service or
replacement.
Equipment must be installed & serviced
by suitably qualified service personnel
in a restricted access area. There are no
user serviceable parts inside.
Document: TPC10_Rev C.pdf
CAUTION
