No user serviceable parts inside
Do not remove module covers
General
This power convertor is designed for indoor use only.
The TPC4 is a low profile DC - DC / AC - DC Convertor designed to convert either 16-24V AC or 20-48V DC to
a reliable, clean output voltage of 18Vdc and is rated for 1A continuous output.
Note: Input voltage must not exceed 48V DC - permanent damage may result.
This model features output current limiting and thermal shutdown protection with auto recovery.
Connection
Connect input power to terminals marked “Input” (see diagram overleaf ).
Note that these terminals are not polarity conscious.
Load equipment may be connected to terminals marked “Out”.
Confirm polarity before connecting.
Output voltage is factory set to 18.2Vdc - see note below:
Battery Operation:
Not available on this model
Input and output LED’s should be illuminated when operating normally.
There are no fuses or user serviceable components inside the cabinet - return to your supplier for service or
replacement.
Equipment must be installed & serviced
by suitably qualified service personnel
in a restricted access area. There are no
user serviceable parts inside.
Document: TPC4_Rev C.pdf
CAUTION
