LE-1 Flashlight – User Guide | 8
Smart Light Control (SLC)
TM
When the LE-1 is secured in a Tactical Impulse Smart
Holster, the flashlight will automatically power OFF if it
was powered ON when holstered. In addition, the LE-1
will remain OFF while in the holster, even if a power
switch is pressed on the LE-1, to avoid accidental
activation of the unit.
User Programming
The LE-1 is programmed by default to power ON in
HIGH mode every time. The LE-1 may also power ON in
the last operating light mode
(mode-memory)
. To
toggle between the two programs, follow the steps
below:
1.
Affix the Tactical Tail-cap to the LE-1 (unless
affixed already).
2.
Insert the LE-1 into either the LE-1 Cradle
Charger or an LE-1 Smart Holster until the LE-1
locks into place *.
3.
Fully depress (full-click) and hold Switch 1 and
Switch 2 together for at least 5 seconds.
