Tactic FPV-RM1, Instruction Manual

Page: 6 / 12

6
A threaded tripod mount is located on the bottom of the monitor. Make sure the monitor is fully threaded
onto the tripod (not included). Alternate methods can be used to mount the monitor to other surfaces/items.
Make sure the mounting method is secure and will not damage the monitor physically or electronically.
Damage to the monitor resulting from poor installation will not be protected under warranty. Do not block the
ventilation holes on the rear of the monitor, as otherwise excess heat could shorten the life of the monitor.
•
Do not allow water, moisture or foreign objects into the monitor.
•
Do not block the ventilation holes on the rear of the monitor.
•
Do not apply cleaning fl uid to the monitor such as alcohol, ammonia-based cleaners such as window
cleaning fl uid, etc.
•
Do not clean the monitor with paper towels, facial tissue, or materials which include abrasives such as
nylon, polyester, etc. as it could scratch the screen.
•
With the monitor off and the screen cool, lightly dust the screen with compressed air from a distance of
at least 12 inches away. Then lightly wipe the screen with a micro-fi ber cloth (included). Wipe the screen
slowly and in horizontal or vertical straight lines (not circular patterns).
A detachable sunscreen is included to help shield the display from sunlight
for optimum viewing. Unfold the sunscreen and align the tabs along the
top and side edges with the holes around the perimeter of the monitor.
Carefully press the tabs into place to affi x the shield to the monitor.
MOUNTING THE MONITOR
SCREEN CARE AND HANDLING