7
QUICK START GUIDE
In your Apple or Google Play Store, download the Tactacam
Reveal app and sign in using the same email and password you
created on the website.
If you already have a Reveal account with ACTIVE cameras, you
can simply login to your app and add your camera following the
instructions below.
5. Turn the power switch to SETUP
• Check the indicator LED status lights; you will see all green when the camera
is ready. Only the WiFi indicator light will be blue.
• If the SD card indicator light is not green, the SD card is bad and needs to
be changed. Be sure to always use a formatted SD card.
• Next to the SD indicator light is the WiFi indicator light. This will be slowly
flashing blue, meaning it is in pairing mode.
• Default camera WiFi SSID is Reveal_****
• Default camera WiFi password is Reveal2021
DOWNLOADING THE APP
1. Click the camera icon at the bottom of the screen
2. Click the + in the upper right hand corner
3. Select Reveal X and Continue
4. Using your phone, scan the QR code located inside the door of the camera
5. Camera activation can take a couple minutes, then you will be prompted to give
your camera a name and location.
If this is your first Reveal that you are activating, please visit the Reveal Web Portal
at https://account.revealcellcam.com to set up your account. Once you have
created your account, and set up your data plan, it is time to activate your camera
in the app:
Summary of Contents for Reveal XB SK
Page 1: ...INSTRUCTION MANUAL REVEALCELLCAM COM ...
Page 20: ......
