TACOFLOW3 MAX / MAX PRO
38
Instructions for installation and use
MKTG-TRA-MAN-E9150400-10/2019-ENG
12.5
SHUTDOWN
1)
De-energise the circulator by turning the main switch (installed by the Client) to
Pos. 0
2)
Check that the LED goes off on the circulator
12.6
EMERGENCY STOP
In order to react to hazardous situations that may arise suddenly, authorised operators must:
1)
De-energise the circulator by turning the main switch (installed by the Client) to
Pos. 0
2)
Check that the LED goes off on the circulator
DANGER
AFTER HAVING STOPPED THE CIRCULATOR AND HAVING INDICATED THE EMERGENCY TO THE MANAGER, IT IS MANDATORY
TO STOP ANY INTERVENTION ON THE CIRCULATOR UNTIL THE MANAGER GIVES CONSENT.
DANGER
IT IS MANDATORY TO CHECK THAT THE CIRCULATOR IS IN THE
SAFETY STATE
BEFORE PERFORMING MAINTENANCE OR
ADJUSTMENTS. THERE ARE
RESIDUAL RISKS 1, 2
AND 3 (SEE CHAP. 8)
.
12.6.1 RECOVERY AFTER AN EMERGENCY STOP
Having eliminated the causes of the emergency and having verified the absence of damage and/or anomalies on the
line, obtain the consent of the Manager to proceed as follows:
1)
Perform the checks before start-up
2)
