iWorx® HPU2
14
502-025, Effective: April 12, 2011
© 2011 Taco Electronic Solutions, Inc.
Getting Help
Components within an iWorx® controller, sensor, or power supply cannot be field repaired. If there is a problem with a
unit, follow the steps below before contacting your local TES representative or TES technical service.
1.Make sure controllers, sensors, and power supplies are connected and communicating to desired devices.
2.Record precise hardware setup indicating the following:
Version numbers of application software.
Device and/or firmware version number.
A complete description of difficulties encountered.
Notes:
What is
Save
for in the
Members
screen and when do I press it?
This button stores network information into the LHP2 about the controllers in its group.
Press this button when you have made any changes to the grouping.
What iWorX controllers can be part of
a LHP2's group?
Only HPU2 controllers can be part of the LHP2's group and demand cooling or heating
from it.
Under what conditions does the
HPU2 require a reset for normal
operation.
There is one condition that requires a reset:
– Equipment failure
Problem
Solution
