Taco Marine M20-1013A Assembly Instructions Download Page 4

Page: 4 / 4

LOW PROFILE

ADJUSTABLE SEAT SLIDE

M20-1013A

Tech Support: 800.653.8567 | [email protected] | tacomarine.com

@tacomarine

INSTALL INSTRUCTIONS

9. NOTE: For ease of installation, it is

recommended that this step be done as
a team.

Lift the seat and position onto the
Mounting Clamp, as shown. Ensure
that the Seat Slide activation handle is
oriented toward the front of the seat.

NOTE: Mounting Clamp is shown un-
installed for visual representation of
mounting the Seat.

10. Mount the 1/4” bolts and washers to the

assembly using an Allen wrench, as shown
to the right.

NOTE: Seat is not shown installed in the
step.

11. Ensure that the bolts from Step 10 are

completely tightened.

12. Operate the Seat Slide to ensure smooth

operation.

Slide the Seat Slider under the

Mounting Clamp hook end.

Mounting

Clamp

Slide

Activation

Handle

Bolts

INS

TRUCT

-M20-

13A

Summary of Contents for M20-1013A

Page 1: ...heck below the surface that you are drilling into for electrical wires tanks hoses or other items that could be damaged by your drill bit or screws WARNING MAINTENANCE The mounting plate and two rails...

Page 2: ...her and nuts 3 Align Seat Slide so the bottom slots are aligned with the holes in the bottom of the seat NOTE Ensure that the Seat Slide Activation Handle is facing toward the front of the seat 4 Atta...

Page 3: ...aligned with the holes in the bottom of the seat 7 Attach the Seat Slide to the Seat with 1 4 bolts and washers as shown This is the same process as Step 6 NOTE Tighten these down completely with an A...

Page 4: ...handle is oriented toward the front of the seat NOTE Mounting Clamp is shown un installed for visual representation of mounting the Seat 10 Mount the 1 4 bolts and washers to the assembly using an All...