®
LOW PROFILE
ADJUSTABLE SEAT SLIDE
M20-1013A
Tech Support: 800.653.8567 | [email protected] | tacomarine.com
@tacomarine
Assembly Instructions
Box Includes
Thank you
for purchasing the Low Profile Adjustable Seat Slide by TACO Marine.
Since 1959, we have taken great pride in offering the highest-quality products
with excellent customer service. We stand behind our products 100 percent.
Please visit our website
tacomarine.com
for more detailed information on a
wide variety of products and to register your new accessory for warranty.
•
ONE (1) SEAT SLIDE HOUSING ASSEMBLY
•
ONE (1) MOUNTING PLATE
•
TWO (2) WASHERS
•
TWO (2) FASTENERS
Required,
but not included
•
EIGHT (8) 1/4” BOLTS
Always check below the surface that
you are drilling into for electrical wires,
tanks, hoses or other items that could be
damaged by your drill bit or screws.
WARNING
MAINTENANCE
The mounting plate and two rails are made with anodized aluminum. This creates a very
hard protective seal on the surface of the aluminum to protect it as much as possible from
pitting. When the anodized coating is broken and raw aluminum is exposed, corrosion will
take place. Avoid damage from abrasive chemicals, knives, gaffs or impacts that can break
the anodized coating. Always use a mild, non-abrasive soap and lots of fresh water when
cleaning any aluminum product on your boat.
For more information on maintenance, visit
tacomarine.com
to view TACO Marine’s Stainless
Steel & Aluminum Care Guide.
Install Seat Slide housing assembly to seat using the seat manufacture’s recommended hardware.
HANDY TIP
