Safety Notes
General Power Tool Safety Warnings
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to
your mainsoperated(corded) power tool or battery-operated (cordless) power tool.
Work area safety
●
●
●
Electrical safety
●
●
●
●
●
●
Personal safety
●
●
●
●
●
●
●
●
●
●
●
●
●
Service
●
Planer Safety Rules
●
●
●
●
●
●
●
●
SAVE THIS USER MANUAL
FUNCTIONAL DESCRIPTION
Adjusting depth of cut
Operation:
Adjust the cutting depth by simply turning the adjustment knob on the front of the tool to
point the pointer at the desired depth of cut.
Switch operation
The Double Safety Switch (two-way press)can be pressed to the left or right, for users with different
habits.
Press the double safety switch and On/Off button at the same time, the electric planer starts working.
Release the On/Off button,the electric planer stops working.
Attention
•
Supporting foot
1.
2.
Install or remove the planer blade
Attention
1.
2.
3.
4.
1
）
2
）
3
）
4
）
5
）
6
）
Planer blade adjustment
1.Your planing surface will end up rough and uneven, unless the blade is set properly and securely. The
blade must be mounted so that the cutting edge is absolutely level, that is,parallel to the surface of the
rear base.
Below are some examples of proper and improper settings
A Front base (Movable shoe) B Rear base (Stationary shoe)
Correct setting Although this side view cannot show it, the edges of the blades run
perfectly parallel to the rear base surface.
Nicks in surface Cause: One or both blades fails to have edge parallel to rear base line
Gouging at start Cause: One or both blade edges fails to protrude enough in relation to
rear base line.
Gouging at end Cause: One or both blade edges protrudes too far in relation to rear base
line.
Machine use
Chips on both sides
（
Pic1
）
（
Pic2
）
Installing and removing Nozzle assembly
：
1.
2.
Planing operation
Grooving
1.
2.
3.
4.
Chamfering
Drive belt
If the drive belt is cracked or torn, replace it immediately. Please replace it with the same type of
V-ribbed belt.
1
）
2
）
3
）
Connect vacuum cleaner
Dust bag (optional accessory)
Maintenance and customer service
Note: Before inspecting or servicing the tool, be sure to turn off the power switch of the tool and unplug
the power plug.
1. Tools and exhaust holes must be kept clean to avoid blockages.
2. If the power cord is damaged, you must purchase a power cord that adapts to the current.
3. The user replaceable parts are the transmission belt and carbon brush. Please contact TACKLIFE for
other parts.
- 08 -
