15.
Make sure the chuck key is removed from the chuck before turning the machine ON.
16.
Adjust the table or depth stop to avoid drilling into the table.
17.
DO NOT TOUCH MOVING PIECES. Keep hands away from the drill bit.
18.
NEVER perform layout, assembly or set-up work on the table while the drill press is operating.
19.
ALWAYS turn off and unplug the machine before removing scrap pieces from the table, cleaning,
making adjustments or changing attachments. Accidental start-ups may occur if the tool is plugged
in during an accessory change or adjustment.
20.
CLEANING. Never use solvents to clean plastic parts. Solvents could dissolve or otherwise dam-
age the material. Use only a soft damp cloth to clean plastic parts.
21.
REPLACEMENTS. Should any component of your drill press be missing/damaged or fail in any
way, shut off the switch and remove the plug from power supply outlet. Replace the missing, dam-
aged, or failed parts using only identical replacement parts before resumingoperation.
22.
Before leaving the machine, shut the power OFF, remove the drill bit, and clean the table.
CALIFORNIA PROPOSITION 65 WARNING
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
may contain chemicals, including lead, known to the State of California to cause cancer, birth defects,
or other reproductive harm. Wash hands after handling. Some examples of these chemicals are:
●
Lead from lead-based paints.
●
Crystalline silica from bricks, cement, and other masonry products.
●
Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies depending on how often you do this type of work. To reduce
your exposure to these chemicals, work in a well-ventilated area with approved safety equipment
such as dust masks specially designed to filter out microscopic particles.
These safety instructions can’t possibly warn of every scenario that may arise with this tool, always
make sure to stay alert and use common sense during operation.
ELECTRICAL INFORMATION
GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least
resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an
electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be
plugged into a matching outlet that is properly installed and grounded in accordance with ALL local
codes and ordi- nances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet installed
by a licensed electrician.
IMPROPER CONNECTION of the equipment grounding conductor can result in electric shock. The
conductor with the green insulation (with or without yellow stripes) is the equipment grounding con-
ductor. If repair or replacement of the electric cord or plug is necessary, DO NOT connect the equip-
ment grounding conductor to a live terminal.
CHECK with a licensed electrician or service personnel if you do
not completely understand the grounding instructions or whether
the tool is properly grounded.
USE ONLY THREE-WIRE EXTENSION CORDS that have
three-pronged plugs and outlets that accept the tool’s plug (Fig. 1).
Repair or replace a damaged or worn cord immediately.
CAUTION:
In all cases, make certain the outlet in question is proper-
ly grounded. If you are not sure, have a licensed electrician check
the outlet.
- 05 -
Fig. 1