Safety instructions
warning: read all safety warnings and all instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
save all warnings and instructions for future reference.
1) Work area safety
a) keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
2) Electrical safety
a) Power tool plugs must match the outlet. never modify the plug in any way. do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets
will reduce risk
of electric shock.
b) avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
c) do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
d) do not abuse the cord. never use the cord for carrying, pulling or unplugging the power tool. keep
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the
risk of electric shock.
e) when operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
3) Personal safety
a) stay alert, watch what you are doing and use common sense when operating a power tool. do not
use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. always wear eye protection. Protective equipment such as dust
mask, nonskid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power
source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on
the switch or energising power tools that have the switch on invites accidents.
d) remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in personal injury.
e) do not overreach. keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
f) dress properly. do not wear loose clothing or jewellery. keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) if devices are provided for the connection of dust extraction and collection facilities, ensure these
are connected and properly used. Use of these devices can reduce dust-related hazards.
4) Power tool use and care
a) do not force the power tool. Use the correct power tool for your application. The correct power tool
will do the job better and safer at the rate for which it was designed.
b) do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive
safety measures
reduce the risk of starting the power tool accidentally.
d) store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool. Power tools are dangerous in the hands of
untrained users.
e) maintain power tools. check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tools operation. if damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f) keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) use the power tool, accessories and tool bits etc. in accordance with these instructions and in the
manner intended for the particular type of power tool, taking into account the working conditions
and the work to be performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5) Battery tool use and care
a) ensure the switch is in the off position before inserting battery pack. Inserting the battery pack into
power tools that have the switch on invites accidents.
b) recharge only with the charger specified by the manufacturer. A charger that is suitable for one
type of battery pack.
c) Use power tools only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
d) when battery pack is not in use, keep it away from other metal objects like paper clips, coins,
keys, nails,
screw, or other small metal objects that can make a connection from one terminal to another. Shorting
the battery terminals together may cause burns or fire.
e) Under abusive conditions, liquid may be ejected from the battery; avoid contact, if contact accidentally
occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
- 01 -