•
For video, make sure the switch on the left is in the UP position.
•
Your camera will record video at 30 FPS. The OPS will record in Standard Definition, and the OPS HD in High
Definition.
•
After you have been recording for 30 minutes, your camera will pause for five seconds to save your file to your
memory card. But don’t worry; it will automatically start up again after those five seconds.
•
You may edit your video files with most common video editing programs.
•
A 4GB Micro SDHC card will hold just over one hour of video. Larger cards will hold multiples of that amount.
Time-Lapse Photos
•
To shoot time-lapse photos, slide the left switch down to the PHOTO position.
•
Now press, but do not hold, the power button in the middle. There will be a beep sound and the LED will flash
alternately Green and Red to show that you are now taking photos - one photo every two seconds.
•
To stop, press and hold the power button until you hear two beeps and the LED turns off.
LED Functions
•
When you are recording video, the LED on the bottom will shine in RED.
•
When you are recording in Time-Lapse Photo mode, this LED will flash RED - GREEN - RED - GREEN.
•
If your memory card is full, this LED will flash GREEN for 30 seconds and then turn off.
PDFmyURL.com
Summary of Contents for OPS
Page 13: ......
