Attached
1st end Strap
Attach
2nd end Strap
FOR THE WIRED CONTROLLER
Step 1. Connect the PS2 connector on the guitar to the controller port 1 or 2 of your
Sony PlayStation 2 console and start the game.
FOR THE WIRELESS CONTROLLER
Step 1. Use the screwdriver that came with box to unscrew the screw to install 4 AA
batteries on the guitar controller
Step 2. Connect the wireless receiver to the controller port 1 or 2 of your Sony
PlayStation 2 console
Step 3. Turn on the guitar controller. The on/off button is located next to the
start/select button on the side of the guitar.
Step 4. Turn the game on. Once both the console and the guitar controller is on, the
AutoSenseTM technology will automatically detect the presence of the guitar
controller.
Step 5. When the LED on the wireless receiver stops blinking and turns solid, the
controller and receiver are connected and ready for the game. Also, a blue
light will be lit where the strum bar is located.
FOR THE V CONTROLLER STRAP
Step 1. Attach 1 end of the strap to the center holder.
Step 2. Attach the 2nd end of the strap to the bottom holder.
Step 3. See illustration
Please refer to the Guitar Hero manual for further instructions.
WARRANTY
• This product comes with three (3) months of warranty from the date of purchase
against manufacturing defect.
For further information on the warranty and to activate the warranty, please
register the product at http://www.theantcommandos.com/warranty.
NOTICE
• This product is made for indoor use only.
• Keep the product at room temperature.
• Product contains electrical components; please keep it away from moisture.
• Modifying or disassembling the controller in any way will void the warranty.
• The controller must be used with care to avoid injury. TAC will not be liable for
injury resulting from the improper use of the controller.
• Do not use any chemical compound to clean the product.
