Tabor Electronics 5064, User Manual

Page: 109 / 369

2074
User Manual
3-38
2
3
1
4
Figure 3-16, Programming Arbitrary Waveform Parameters
Generating
Sequenced
Waveforms
In general, the Model 2074 cannot by itself create sequenced
waveforms. If you want to use sequenced waveforms, you must first
load them into the instrument. The 2074 is supplied with waveform
creation and editing, called – ArbConnection. Besides waveform
creation, ArbConnection has instrument control features, sequence
table generator and many other features that will be described
separately. To generate a sequence you must first download
waveforms to the instrument, generate a sequence table and
download the sequence table to the instrument. Sequences are
generated easily using the waveform Studio as demonstrated in
Figure 3-17. Note that different sequences can be generated for
each channel.
Detailed information on the structure of the arbitrary waveform and
the commands that are needed to download arbitrary waveforms to
the 2074 is given in Chapter 5. There, you can also find information
how to create and download sequence tables using SCPI
programming commands. Information in this chapter will give you
some general idea what sequenced waveforms are all about.