EN
Version 2018-09 - Mounting instructions TabLines TWE Tablet wall in solution
7
4.2 Attaching the tablet holder
After you have prepared the recess and selected the
correct depth, you can simply screw the tablet holder
in the recess. Use the supplied M4 screws.
With the included M5 screws, the installation depth
can still be slightly corrected to compensate for
unevenness of the wall. You can simply screw the six
M5 screws (see Fig. 8) in and out with a hex key.
Alternative mounting options of the tablet holder on
the wall are special adhesives, construction foam or
tape..
4. Mounting on solid walls
4.1 Wall recess
Draw the measurements anywhere on a wall. Choose a
mounting in portrait or landscape format, adjusted to
the position of the home button..
Cut or mill out the required area. Be sure to pay
attention to the depth of your recess, so that the upper
frame can later lay flat on the wall.
Abb. 7: Drawing the dimensions
Fig. 8: Mounted tabletholder; Correcting bumps by
adjusting the M5 screws
4.3 Inserting the tablet
Note that the tablet's homebutton is facing down.
Place the tablet between the insertion strips as shown
in Figure 9 (the insertion strips are already supplied
glued in).
Be careful not to drop your tablet during assembly.
Whenever possible, hold it down firmly until the top
frame secures the tablet.
Abb. 9: Inserted tablet
