6
How to maintain the table tennis robot
fasten
loosen
Loosen screws at the robots base
Loosen four screws
Take out the misplaced items
Poking bar
Electric component: The electric
component in this product consists
mainly of the base machine s circuit
boards and the control box, which is
the command centre of the robot.
Therefore, any jolts or shakes should
be avoided. The control box must be
inserted into the support at the side
of the table to avoid dropping and
breaking. Never allow any liquid on
to its surface, in order to prevent
electrical leakage and/or damage to
its electronic units.
Mechanical component: The
mechanical component in the table
tennis robot is concentrated mainly
on the mechanisms for ball service
and delivery. Special attention
should be paid so that any foreign
objects are not put into the ball
container, except for the balls.
Under normal operation, the top and bottom wheels
(friction wheels) are able to work for 5000 hours or
longer. The friction wheels need to be replaced
after a long time in use. When replacing the
wheels, power off the robot, remove the protective
cover and take out the screw from the friction wheel
with a screwdriver. After replacing a new one, screw
back everything properly.
Please keep the robot clean. The top and bottom
wheels (friction wheels) may get dirty after long use.
To ensure a quality serve, please clean the wheels
regularly with a wet towel. Turn off the power before
cleaning the robot. Take care when moving the
shooting head, so as to prevent damage to the
internal parts. During an operation or
transportation, protect the robot against any strong
impact or shakes.
Unplug and power off the robot after finishing your
exercise.
Otherwise, they would block the delivery wheel in the robot and would result in no ball delivery and may
even damage the robot. There is a view window fixed at the underside of the moveable door. You can
turn off the power, open the moveable door, remove the transparent guard plate, and take out any foreign
objects if such things have entered, thus returning the robot to its normal operation. When the poke bar
inside the ball container has been in use for a long time, it should be checked for loose screws and/or
cracks, so as to prevent any trouble which would lead to poor delivery of the balls.
Summary of Contents for PP80
Page 1: ......
