3
Connection
To listen to this unit’s audio through a
stereo or other external unit, connect
as follows:
Connect the Audio cable’s red and
white plugs to the red and white
AUDIO OUT jacks on the iSM395BT
and the other ends to the external
unit’s red and white Audio In jacks.
Note: Audio cables are not included.
Connecting a Digital Music Player to this Unit
Your Singing Machine is designed to connect your favorite digital
music device (iPod, MP3 player, etc.). Simply connect your device
by using an appropriate audio cable (3.5mm audio cable not
included). When connected, the Aux function is automatically
selected. See page 7 for more details.
Connecting this Unit to an External Stereo, etc.
AUDIO
INPUT
R
L
REAR VIEW OF EXTERNAL UNIT
REAR VIEW
RCA cables
AUDIO OUT
(white - L
red - R)
Inserting Batteries
1
Lift battery door to reveal battery compartment.
2
Insert four (4) “C” size alkaline batteries (not
included) as indicated by the polarity in the
battery compartment.
3
Replace battery door tightly before operating.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1.
Warning – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
2.
Use only the size and type of batteries specified.
3.
Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. A reversed battery
may cause damage to the device.
4.
Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with fresh ones.
5.
If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery
leakage.
6.
Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer’s
directions.)
7.
Remove batteries promptly if consumed.
8.
Clean the battery contacts and also those of the device prior to battery installation.
“C” SIZE 1.5V X 4 UM-2
+
–
+
–
+
–
+
–
iSM395bt-ENG-v4_Layout 1 7/26/13 8:50 AM Page 3
