manualshive.com logo in svg

Tab R4824, Operation Manual, Page: 11 / 34

Share
Download
Tab R4824 Operation Manual Download Page 11

3.3 Equipment interface instruction

Power Switch        

                                                                         

ON: ready to turn on. 
OFF: power off. For storage or shipping.

Start 

                                                                                        

Turn on: press more than 0.5s to start the battery module
Turn off: press more than 0.5s to turn off the battery.

RUN    

                                                                                     

Green LED lighting to show the battery running status

Alarm             

                                                                           

Red LED flashing to show the battery has alarm; lighting to show the battery is under pro

-

tection. 

SOC    

                                                                                     

6 green LEDs to show the battery’s current capacity.

ADD Switch           

                                                                        

Dip1: RS485 baud rate: 1: 9600; 0: 115200. After change, please restart battery.
Dip2: CAN terminal resistance on BMS side. 1: NONE. 0: connected. After change, no re

-

start required. 

In single group mode, please keep dip2 at 0 position.

 For multi-groups, 

please refer to [5.8].

11

R4824_Operating_Manual_17.05.2021.indd   11

R4824_Operating_Manual_17.05.2021.indd   11

17.5.2021   14:15:54

17.5.2021   14:15:54

Summary of Contents for R4824



































Reviews:

No comments