6
Components.
— 03
①
Mast with board mounting box and a fuse-
lage fixing mount
(either a Standard Kite Mount or a
Standard Windfoil Mount)
②
Front wing with three fixing points
(V-Fix system)
③
Stabilizer with two attachments allowing
the precise and fast adjustment of
the angle of the stabilizer thanks to
two screws and a half-moon geometry
directly shaped in the fuselage
(Quick N Precise)
④
Fuselage with anchor point for the mast
①
②
③
④
⑤
⑥
⑦
⑧
⑤
Set of screws for fixing the front wing
(3 screws)
⑥
Set of screws for fixing the stabilizer
(2 screws)
⑦
Set of screws for fixing the mast to the
fuselage
(2 screws)
⑧
Set of screws for attaching your board (
2
screws or 4 screws for a plate mount
)
⑨
Protection covers for these elements to
avoid damage during transport
(not shown in the
diagram above)
— 01
Description
WARNING
The shape of the wing profile and the wing’s surface must not be modified, altered, coated or sanded. Otherwise,
there is a risk that the balance and functioning of the foil may be impacted.
The rear edge of the wings (the trailing edge) must remain very thin in order to guarantee the foil performance.
Because of this thinness, the rear wing is more fragile upon impact. As mentioned, itis important to pay very close
attention to these sharp edges when handling and using the foil so that you don’t injure yourself or others.
EN
