DHR/AR Series Environmental Test Chamber Getting Started Guide
Page 18
Installing the Lower Assembly
1
Fit the lower attachment, ensuring it is aligned correctly. See the figure below.
Figure 11
Fitting the lower attachment.
2
Connect the accessory cable from the lower attachment to the rheometer, as seen below.
Figure 12
Connecting the accessory cable from the lower attachment to the rheometer.
3
Close the oven and ensure that no part of the doors touch any part of the lower fixture. No change should
be observed in the axial force when the doors are closed. Adjust the position of the ETC again, if required.
4
Attach the upper geometry, again making sure that no parts are touching the fixture, and adjust the ETC
if necessary.
5
If you plan to use the liquid nitrogen option with the ETC, skip the following steps and proceed to
“Installing the Low Temperature Accessory” on page 21
. Otherwise, continue with the instructions
below.
Accessory cable plug connection
