TA D-LOGG, Manual

Page: 12 / 32

Winsol
12
Temperature difference
For fault analysis, a saving criterion of 3.0K is recommended. Each time a temperature
measured value changes by more than 3.0K
or an output status changes, a "Measured
value point-in-time" is saved. In this respect the maximum time resolution is 10 seconds.
Adjustment range: 0.5
– 12.0K
Memory capacity
The maximum number of points-in-time that the data logger can store depends on the type
and number of controllers to be recorded.
Max. number of points-in-time
(Data logging using the DL-bus) Controller type: With 1xDL: With 2xDL:
UVR1611,
UVR61-3,
UVR63, UVR63H
8000 4000
ESR21
ESR31 16000 8000
All others 32000 16000
A memory overflow leads to overwriting of the oldest data.
3. Window: Measured value descriptions
A device description and descriptions for the measured values can be specified for all devic-
es.
Summary:
Selection of the device
Device description
Description of the analog and digital values
Conclusion of the setup process by clicking
OK
Important:
Setup is only completed if the "OK" button has been clicked.