1
17
Drive/push mode
The electric wheelchair should only be set
on push mode or pushed for the sake of
manoeuvring or in emergency situations.
This should only be done on flat terrain,
with the chair in a standstill position.
☞
In push mode, the electromagnetic
brakes are deactivated.
– Thus, the wheelchair can only be
braked by switching to drive mode.
☞
Grasp the back support at armrest level
to manoeuvre the wheelchair.
Setting the chair on push mode
1. Turn off the wheelchair using the con-
trol module. If the wheelchair is turned
on while the lever is guided into the
push position, an error message ap-
pears on the display and an acoustic
alarm sounds.
☞
See the ‘
Control module
’ chapter in
the Operating manual.
2. Release the brakes [1].
☞
Follow the instructions in
Releasing
the brakes
on page 15.
The wheelchair can now be pushed.
MDR,
not
final
version